Strange...

Posted by Kromey at 12:53pm Aug 17 '12
You must sign in to send Kromey a message
"Fast Ethernet" is capable of maximum throughput of 100Mbps.

"Wireless-N" is capable of maximum throughput of 300Mbps (in "channel bonded" or "40 MHz" mode"; roughly 130Mbps in single-channel mode).

(Both reference theoretical -- I'm fully aware that actual throughput will vary and will in actuality be lower than this.)

Both of these facts I have been aware of for some time. However, only just now am I putting 2-and-2 together to realize this:

What is the point in buying a Wireless-N AP that only has a 10/100 Ethernet link in it?? "Woo-hoo! My wireless devices can talk to each other at 300Mbps! Unfortunately they're throttle back to a third of that on my Gigabit network when they're downloading from my file server..."

I guess even bottle-necked down to 100Mbps across the wire, that's still almost twice the speed of Wireless-G. But, still, if you're going to sell Wireless-N APs, wouldn't you want to give your customers the ability to actually get that 300Mbps speed you advertise on the box?

added on 12:53pm Aug 17 '12:
I have a TEW-637AP Wireless-N access point with a 10/100 Ethernet link plugged into my Gigabit switch -- which is where this whole thing came from.
There is 1 private post in this thread. You need to sign in to read it.

Below are the public posts you may view:

You currently have read-only access to this board. You must request an account to join the conversation.

Why Join 4thKingdom?

Note that there are no ads here. Just intelligent and friendly conversation. We keep the spam out, the trolls out, the advertisers out… 4K is just a low-key, old-fashioned site with members from around the world.
This community began in 1998, and we continue to accept new members today.

Hot Discussion Topics: